![\"thinca_img\"](\"http:\/\/ohtavn.com\/wp-content\/uploads\/2024\/01\/unnamed.png\")
<\/p>\nThis time, we would like to introduce an innovative high-performance screw
\nthat can be used as an alternative to locking agents and locking nuts, and can reduce costs.<\/p>\n
This bolt has a special thread shape that increases the reaction force of the thread and has a strong locking effect.<\/p>\n
<\/p>\n
The thread of a typical screw is a thread with a 60 degree angle according to JIS or DIN standards.
\nHowever, in the case of Motion-tite, the screw thread has a unique shape rather than a neat isosceles triangle,
\nso it is a screw thread that has been installed in a female thread in the entire screw fastening part to prevent loosening. say.<\/p>\n
An eternal problem with fastening parts such as screws, bolts, and nuts is the occurrence of loosening.
\nIn the first place, bolts and nuts fit together in a spiral shape,
\nso they can loosen due to factors such as vibration and deterioration over time.<\/p>\n
There are locking nuts, washers, locking springs, etc. to solve this loosening problem,
\nbut there are actually bolts that have a locking function.<\/p>\n
This is a high-performance screw called Motion-tite.<\/p>\n
<Typical advantages>
\n1. High ability to prevent loosening with a single bolt
\n2. Fatigue strength 1.2 to 1.4 times
\n3.Excellent workability
\n4. Stable axial force even without lubrication
\n5. Low cost and high quality<\/p>\n
While standard bolts are symmetrical, Motion-tite is asymmetrical,
\nand this structure prevents loosening just by tightening normally.<\/p>\n
The Motion-tite has patents in 11 countries around the world. For inquiries regarding samples or materials, please respond to this email or contact our sales representative!<\/strong><\/span><\/p>\n At Ohta Vietnam, we not only provide ready-made products such as screws and bolts, but also support activities in the manufacturing field such as cutting, inspection, assembly, packaging…
\nAnother major feature of Motion-tite is that it is “hard to break<\/strong>.”
\nAs mentioned earlier, Motion-tite creates a contact surface with the entire screw,
\nwhich reduces the chance of thread breakage by suppressing variations in the coefficient of friction.<\/p>\nConclusion<\/h3>\n
![\"column_cta-banner\"](\"http:\/\/ohtavn.com\/wp-content\/uploads\/2023\/12\/column_cta-banner_en.jpg\")
<\/a><\/p>\n
\nOur equipment list is here<\/a><\/strong><\/p>\n